Filer's Forum

[ Home | Contents | Search | Post | Reply | Next | Previous | Up ]


Re: Aligning Ukiah Gang Saw

From: roundsawfiler@aol.com
Categories: Alignment
Date: 27 Jun 2002
Time: 18:46:36
Remote Name: 68.70.160.150

Comments

check your press roll timing. if the roll comes down to quick it will stop the cant. also check the drive chains/belts for the infeed if it is to loose it may through the timing off. check the drive belts for the arbor/s and make sure they are slipping (look for glaved or blistered belts) e-mail me if you need any more help or if this helps out