Inserted tooth edger saws

Issues related to circular saws: benching, tipping, grinding, feeds and speeds, alignment, ....

Moderator: thinkerf

Inserted tooth edger saws

Postby ol doublecut » Wed Apr 29, 2009 3:05 pm

I had a friend call me and ask for some help designing some saws for their new inserted tooth edger. Here is what I came up with. I am a little reluctant to increase the tooth bite much more with only 60 HP on the arbor. How does this look?? Any ideas ?? Thanks

saw = 25" diameter (given)
plate = .148" (given)
bits are 5/32" ( would rather have used 1/4" bits but they are going to get really hard to get very soon)
feed speed = 180 fpm
saw rpm = 1400 (given)
number of teeth = 21
max depth of cut = 6"
min. depth of cut = 1"
horsepower = 60 (given)
number of saws in cut at any one time = 3
tooth bite = .073
side clearance = .082
ol doublecut
Posts: 1
Joined: Wed Apr 29, 2009 2:41 pm

Re: Inserted tooth edger saws

Postby thinkerf » Mon Jun 01, 2009 10:31 am

What type of wood are you cutting - hardwood or softwood?

Actually, a larger bite reduces hp. Think of it the other way - if you're cutting fine sawdust it takes a lot of energy to break the wood into little bits.

Also, torque is the other factor to consider.
Site Admin
Posts: 10
Joined: Sun Mar 29, 2009 4:08 pm

Return to Circular Sawing

Who is online

Users browsing this forum: No registered users and 0 guests