[ Home | Contents | Search | Post | Reply | Next | Previous | Up ]
From: Matt Childs . firstname.lastname@example.org .au
Categories: Board Edgers
Time: 9:43:43 AM
Remote Name: 188.8.131.52
I'm experiencing trouble with tooth brekage on my edger saws.The machine is a Catech 4203 and is not quite two years old. Saw Specs.350mm Dia,No.2 spline,3.5mm plate,48 teeth,carbide tipped.RPM 3500 and feed speed of 330metres/per minute.Maximum depth of cut 2 inches.Teeth are breaking of at base of gullet.New saw only lasting 2 hours.