[ Home | Contents | Search | Post | Reply | Next | Previous | Up ]
Date: 06 Sep 1999
Remote Name: 220.127.116.11
No doubt many filers who heat tension their bandsaws (as I do) have scratched heads from trying to figure out how to do that. If you come up with a way, please share it with us all. Obvious benefits are: no rolling stresses and weakening of sawplate which sometimes leads to dishing, and of course a flatter saw. I have attempted heat tension on circular saws, but was unsuccessful due to the wave distortion when the rim stretched. So have fun when it curls up! and keep us posted...
Categories: Board Edgers
Date: 26 Jan 2000
Remote Name: 18.104.22.168
we are running a three saw shurman edger.i work at the international paper comp. in folkston ga.we started with a 64tip 24" we are now running a 20" 62 tip we don't have any tip's broken out or shoulder breakage at all.i run stellite tip's. we no longer have trouble.if you would like to write me and ask questions or call my work phone is (912)496-1225 ask for daniel p. montgomery.if i can help you i will.