[ Home | Contents | Search | Post | Reply | Next | Previous | Up ]
From: Rich Darling Head Filer Northwood Inc. Houston Canada
Date: 07 Nov 1999
Remote Name: 184.108.40.206
Date: 20 Feb 2000
Remote Name: 220.127.116.11
In Reply to the problem with the Resaw pulling toward the Line bar. I have had problems like that before.Starting in the filing room, check your grinding wheel with your face plate to make sure it is running perpendicular. Also if you are running stellite make sure your teeth are being ground even on both sides. And if running swedge teeth make sure your shaper is centered. Going out on the machine itself, check for any kind of loosness on the bottom end of your line bar. Alot of times just the smallest kind of movement can cause your problem. If you don't find anything one of your last resorts are try a heavier gauge saw,increase guide pressure, pump your strain up or try putting a little lead away from your line bar with your guides. I hope I have givin you some new ideas.